MSL-Series / Spring Loaded Automatic Tensioning
The MSL Tensioner, with a compression spring located in the base casting, is designed for drives with shock and pulsating loads. For every 28 pounds of force applied, the spring will compress 1 inch. The tensioner will "cushion" and protect the drive from the damage caused by shock and pulsation. The idler head casting rotates 360 degrees and vertical adjustment is accomplished through 4 slots.
| Model No. | Use with Shaft No.* | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | App. Wt. | Downloads | |||
| MSL | SO5 | 3-1/4" | 4" | 1-1/2" | 3-3/16" | 1-7/8" | 6" | 4-3/8" | 7" | 3" | 2-5/8" | 1-5/8" | 5/8" | 10" | 1-5/8" | 13/16" | 14"-17" | 18 | dwg | dxf | step | igs |
| MSL | SO6 | 5-1/4" | 6" | 1-1/2" | 3-3/16" | 1-7/8" | 6" | 4-3/8" | 7" | 3" | 2-5/8" | 1-5/8" | 5/8" | 10" | 1-5/8" | 13/16" | 14"-17" | 18 | dwg | dxf | step | igs |
*Idler shaft and set collar not included in tensioner unit. Must be ordered separately.